CONFIDENTIAL
Paper roll Print commands LF
Ver. 10.01 p. 73
TM-L90
When the origin of layout is selected to bottom of label or top of black mark in standard mode
and a paper feed amount that exceeds the remaining printable area of the label is sent, the
printer executes one of the following:
■ If the printer will print a line that is higher than the remaining printable area of the label, the printer feeds
the label to the next print starting position and the printer executes this command.
■ If the printer will print in the remaining printable area of the label, but the feed amount exceeds the
remaining printable area of the label, the printer prints the label and feeds to bottom of the label.
TM-L60II
When label paper is selected in standard mode and a paper feed amount that exceeds the
remaining print area of the label is sent, the printer feeds the label to the next print starting
position.
To Next Page
Loading...
Need help?
General