Epson TM-T88III

CONFIDENTIAL
Paper roll Character commands ESC t
Ver. 10.01 p. 135
ESC t
SETTING COMMAND
[Name] Select character code table
[Format] ASCII ESC t n
Hex 1B 74 n
Decimal 27 116 n
[Range] TM-J2000/J2100, TM-T88III, TM-T90, TM-L90:
0 ≤ n ≤ 5, 16 ≤ n ≤ 26, n = 255 (Thai model)
0 ≤ n ≤ 5, 16 ≤ n ≤ 19, n = 255 (Other than Thai model)
TM-L60II, TM-U300A/B: 0 ≤ n ≤ 5, n = 255
TM-P60: 0 ≤ n ≤ 5, 16 ≤ n ≤ 19, n = 255
TM-U220: 0 ≤ n ≤ 5, 16 ≤ n ≤ 19, n = 254, 255 (Other than the following models)
0 ≤ n ≤ 8, 16 ≤ n ≤ 26, n = 255 (Japanese model)
0 ≤ n ≤ 5, 19 ≤ n ≤ 26, n = 255 (Thai model)
TM-U230, TM-U210:
0 ≤ n ≤ 5, n = 19, 254, 255 (Other than the following models)
0 ≤ n ≤ 8, n = 19, 254, 255 (Japanese model)
0 ≤ n ≤ 5, 19 ≤ n ≤ 26, n = 254, 255 (Thai model)
[Default] Thai models: n = 20
Other than the Thai models: n = 0
[Printers not featuring this command] None
[Description] Selects a page n from the character code table as follows:
n Character code table
0 Page 0 [PC437 (U.S.A., Standard Europe)]
1 Page 1 [Katakana]
2 Page 2 [PC850 (Multilingual)]
3 Page 3 [PC860 (Portuguese)]
4 Page 4 [PC863 (Canadian-French)]
Character commands