Epson TM-T88III

CONFIDENTIAL
Paper roll Two-dimension code commands GS ( k
Ver. 10.01 p. 542
GS ( k <Function 280>
[Name] MaxiCode: Store the data in the symbol storage area
[Format] ASCII GS ( k pL pH cn fn m d1...dk
Hex 1D 28 6B pL pH 32 50 30 d1...dk
Decimal 2940107 pL pH 50 80 48 d1...dk
[Range] 4 ≤ ( pL + pH × 256) ≤ 141 (4 ≤ pL ≤ 141, 0 ≤ pH ≤ 0)
cn = 50
fn = 80
m = 48
0 ≤ d ≤ 255
k = ( pL + pH × 256) – 3
[Description] Stores the MaxiCode symbol data ( d1...dk ) in the symbol storage area.
[Notes]
■ Data stored in the symbol storage area by this function is processed by Function 281 and 282. The data in
the symbol storage area are reserved after processing Function 281 or 282.
■ k bytes of d1...dk are processed as the symbol data.
■ Settings of this function are effective until the following processing is performed:
• Function 080 or 180 or 280 is executed
• ESC @ is executed
• The printer is reset or the power is turned off
[Model-dependent variations] TM-T90
TM-T90
This model not support this function.