Epson TM-T88III

CONFIDENTIAL
Paper roll Miscellaneous commands GS ( D
Ver. 10.01 p. 422
GS ( D
SETTING COMMAND
[Name] Enable/disable real-time command
[Format] ASCII GS ( D pL pH m [a1 b1]...[ak bk]
Hex 1D 28 44 pL 10.01 pH 14 [a1 b1]...[ak bk]
Decimal 294068 pL pH 20 [a1 b1]...[ak bk]
[Printers not featuring this command] TM-T88III, TM-L60II, TM-U230, TM-U210, TM-U300A/B
[Range] ( pL + pH × 256) = 3, 5 ( pL = 3, 5, pH = 0)
m = 20
TM-J2000/J2100 , TM-T90 , TM-L90:
a = 1, 2
b = 0, 1, 48, 49
TM-P60: a = 2
b = 0, 1, 48, 49
TM-U220:
a = 1
b = 0, 1, 48, 49
[Default] TM-J2000/J2100 , TM-T90 , TM-L90:
a = 1/ b = 1 (DLE DC4 fn m t ( n = 1): enable)
a = 2/ b = 0 (DLE DC4 fn m t ( n = 2): disable)
TM-P60: a = 2/ b = 0 (DLE DC4 fn m t ( n = 2): disable)
TM-U220: a = 1/ b = 1 (DLE DC4 fn m t ( n = 1): enable)
[Description] Enables or disables the real-time command.
• pL , pH specifies ( pL + pH × 256) as the number of bytes after pH ( m and [a1 b1]...[ak bk] ).
• a specifies the type of real-time command.
• b specifies enable/disable of real-time command processing.
Miscellaneous commands