Epson TM-T88III

CONFIDENTIAL
Paper roll Miscellaneous commands GS ( D
Ver. 10.01 p. 423
• a specifies the type of real-time command.
• b specifies enable/disable of real-time command processing.
DLE DC4 n m t ( n =1): Generate pulse in real-time.
DLE DC4 n a b ( n =2): Execute power-off sequence.
[Notes]
■ The printer processes each real-time command that is enabled upon receiving it.
■ A real-time command specified as disabled is not processed.
■ The setting of this command is effective until ESC @ is executed, the printer is reset, or the power is
turned off.
ab Function
1 0, 48 Disable DLE DC4 fn m t ( fn = 1) (does not execute the process)
1, 49 Enable DLE DC4 fn m t ( fn = 1) (execute the process)
2 0, 48 Disable DLE DC4 fn m t ( fn = 2) (does not execute the process)
1, 49 Enable DLE DC4 fn m t ( fn = 2) (execute the process)
ab Real-time command type
1 0, 48 Disable DLE DC4 n m t ( n = 1): (does not execute the process)
1, 49 Enable DLE DC4 n m t ( n = 1): (execute the process)
2 0, 48 Disable DLE DC4 n a b ( n = 2): (does not execute the process)
1, 49 Enable DLE DC4 n a b ( n = 2): (execute the process)