Epson TM-T88III

CONFIDENTIAL
Paper roll Bit-image commands GS ( L GS 8 L
Ver. 10.01 p. 265
GS ( L pL pH m fn a bx by c x L x H y L y H d1... dk <Function 112>
GS 8 L p1 p2 p3 p4 m fn a bx by c x L x H y L y H d1... dk
[Name] Store the graphics data in the print buffer (raster format).
[Format] ASCII GS ( L pL pH m fn a bx by c xL xH yL yH d1...dk
Hex 1D 28 4C pL pH 30 70 30 bx by c xL xH yL yH d1...dk
Decimal 294076 pL pH 48 112 48 bx by c xL xH yL yH d1...dk
ASCII GS 8 L p1 p2 p3 p4 m fn a bx by c xL xH yL yH d1...dk
Hex 1D 38 4C p1 p2 p3 p4 30 70 30 bx by c xL xH yL yH d1...dk
Decimal 295676 p1 p2 p3 p4 48 112 48 bx by c xL xH yL yH d1...dk
[Range] 11 ≤ ( pL + pH × 256) ≤ 32778 (0 ≤ pL ≤ 255, 0 ≤ pH ≤ 128)
[When using GS 8 L: 11 ≤ ( p1 + p2 × 256 + p3 × 65536 + p4 × 16777216) ≤ 32778]
m = 48, fn = 112, a = 48
0 ≤ d ≤ 255
k = (int(( xL + xH × 256) + 7)/8) × ( yL + yH × 256)
TM-J2000/J2100: bx = 1, 2
by = 1, 2
49 ≤ c ≤ 51 (TM-J2100 [two-color printing model])
c = 49 (TM-J2000 [single-printing model])
1 ≤ ( xL + xH × 256) ≤ 2048 (0 ≤ xL ≤ 255, 0 ≤ xH ≤ 8)
1 ≤ ( yL + yH × 256) ≤ 128 (0 ≤ yL ≤ 128, yH = 0)
TM-T90: bx = 1, 2
by = 1, 2
c = 49, 50 (when the recommended two-color paper is used)
c = 49 (when the recommended monochrome paper is used)
1 ≤ (x L + x H × 256) ≤ 1024 (0 ≤ x L ≤ 255, 0 ≤ x H ≤ 4)
[Other than Japanese Model]
With recommended two-color paper
(
by = 1): 1 ≤ (y L + y H × 256) ≤ 831 (0 ≤ y L ≤ 255, 0 ≤ y H ≤ 3)
( by = 2): 1 ≤ (y L + y H × 256) ≤ 415 (0 ≤ y L ≤ 255, y H = 0, 1)
With recommended monochrome paper