Epson TM-T88III

CONFIDENTIAL
Paper roll Two-dimension code commands GS ( k
Ver. 10.01 p. 518
GS ( k <Function 067>
[Name] PDF417: Set the width of the module
[Format] ASCII GS ( k pL pH cn fn n
Hex 1D 28 6B 03 00 30 43 n
Decimal 2940107 3 0 48 67 n
[Range] ( pL + pH × 256) = 3 ( pL =3, pH =0)
cn = 48
fn = 67
TM-T90, TM-L90:2 ≤ n ≤ 8
[Default] TM-T90 , TM-L90: n = 3
[Description] Sets the width of the module for PDF417 to n dots.
[Notes]
■ Settings of this function affect the processing of Functions 081 and 082.
■ The setting unit differs, depending on the printer models.
■ Settings of this function are effective until ESC @ is executed, the printer is reset, or the power is turned
off.
[Model-dependent variations] TM-T90, TM-L90
TM-T90
The setting unit is 1 dot.
With all models other than the Japanese model, the width is set in units of 0.141 mm {1/180 inch}.
With the Japanese model, the width is set in units of 0.125 mm {1/203 inch}.
TM-L90
The setting unit is 1 dot. The width is set in units of 0.125 mm {1/203 inch}.