Epson TM-T88III - Transmit Status

CONFIDENTIAL
Paper roll Status commands GS r
Ver. 10.01 p. 331
GS r
EXECUTING COMMAND
[Name] Transmit status
[Format] ASCII GS r n
Hex 1D 72 n
Decimal 29 114 n
[Range] TM-T90, TM-T88III, TM-L90, TM-L60II, TM-U230, TM-U220, TM-U210: n = 1, 2, 49, 50
TM-J2000/J2100: n = 1, 2, 4, 49, 50, 52 , TM-P60: n = 1, 49
[Printers not featuring this command] TM-U300A/B
[Description] Transmits the status using n as follows:
[Notes]
■ Each status is 1 byte.
■ The status to be transmitted is as follows:
• Paper sensor status ( n = 1, 49)
n Function
1, 49 Transmits paper sensor status
2, 50 Transmits drawer kick-out connector status
4, 52 Transmits ink status
Bit Binary Hex Decimal Status
0, 1 00 00 0 Roll paper near-end sensor: paper adequate.
... how to use
this table
11 03 3 Roll paper near-end sensor: paper not present.
2, 3 00 00 0 Roll paper end sensor: paper present.
11 0C 12 Roll paper end sensor: paper not present.
4 0 00 0 Not used. Fixed to Off.
5,6 — — — Undefined.
7 0 00 0 Not used. Fixed to Off.
Status commands