Epson TM-T88III Programming Guide

CONFIDENTIAL
Paper roll Status commands GS r
Ver. 10.01 p. 332
• Some paper sensors are not present, depending on the printer model. The names of some paper sensors
are different, depending on the printer model.
■ The status to be transmitted is as follows:
• Drawer kick-out connector status ( n = 2, 50)
■ The status to be transmitted is as follows:
• Ink status ( n = 2, 50)
■ When you use this command, obey the following rules.
Bit Binary Hex Decimal Status
0 0 00 0 Drawer kick-out connector pin 3 is LOW.
... how to use
this table
1 01 1 Drawer kick-out connector pin 3 is HIGH.
1-3 — — — Undefined.
4 0 00 0 Not used. Fixed to Off.
5, 6 — — — Undefined.
7 0 00 0 Not used. Fixed to Off.
Bit Binary Hex Decimal Function
0 0 00 0 Ink end not detected (1st color)
... how to use
this table
1 01 1 Ink end detected (1st color)
1 0 00 0 Ink end not detected (2nd color)
1 02 2 Ink end detected (2nd color)
2, 3 - - - Undefined.
4 0 00 0 Not used. Fixed to Off.
5, 6 - - - Undefined.
7 0 00 0 Not used. Fixed to Off.

Epson TM-T88III Specifications

General

Brand	Epson
Model	TM-T88III
Category	Printer
Language	English