Epson TM-T88III Programming Guide

CONFIDENTIAL
Paper roll Customize commands FS g 2
Ver. 10.01 p. 553
FS g 2
EXECUTING COMMAND
[Name] Read from NV user memory
[Format] ASCII FS g 2 m a1 a2 a3 a4 nL nH
Hex 1C 67 32 m a1 a2 a3 a4 nL nH
Decimal 28 103 50 m a1 a2 a3 a4 nL nH
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-L90, TM-L60II, TM-P60, TM-U230, TM-U220,
TM-U210, TM-U300A/B
[Range] TM-T88III: m = 0
0 ≤ ( a1 + a2 × 256) ≤ 1023 (0 ≤ a1 ≤ 255, 0 ≤ a2 ≤ 3, a3 = 0, a4 = 0)
1 ≤ ( nL + nH × 256) ≤ 80 (0 ≤ nL ≤ 80, nH = 0)
[Description] Transmits the data in NV user memory.
• a1 , a2 , a3 , and a4 specify the starting address of transmission data as
( a1 + a2 × 256 + a3 × 65536 + a4 × 16777216).
• nL and nH specify the amount of transmission data as ( nL + nH × 256) bytes.
[Recommended Functions]
■ This is an unrecommended command. It is supported by some printer models but will not be supported by
future models.
■ GS ( C is recommended to write to NV user memory. Operation of GS ( C offers the following
improvements:
• Data can be controlled by record.
• Each record can be redefined, retrieved, or deleted by keycode.
• Memory can be used efficiently because the printer controls the data.
• Transmission data can be identified.
• The amount of definition area remaining can be confirmed.
[Notes]
■ NV user memory is the memory area used for storing character font data in non-volatile memory.
Customize commands
obsolete command
obsolete command

Epson TM-T88III Specifications

General

Brand	Epson
Model	TM-T88III
Category	Printer
Language	English