Epson TM-T88III

CONFIDENTIAL
Paper roll Customize commands GS ( C
Ver. 10.01 p. 560
GS ( C pL pH m fn b c1 c2 <Function 0>
[Name] Delete the specified record
[Format] ASCII GS ( C pL pH m fn b c1 c2
Hex 1D 28 43 05 00 00 fn 00 c1 c2
Decimal 294067 5 0 0 fn 0 c1 c2
[Range] ( pL + pH × 256) = 5 ( pL = 5, pH = 0)
m = 0
fn = 0, 48
b = 0
32 ≤ c1 ≤ 126
32 ≤ c2 ≤ 126
[Description] Deletes the record specified by the key codes ( c1 , c2 ) in the NV user memory.
• Deleted areas are designated “Unused areas.”
• Deleted key codes are designated as undefined.
[Notes]
■ In standard mode, this command is valid only at the beginning of the line.
■ You cannot include macros with this command, so do not use this command while defining macros.
[Model-dependent variations] None