Epson TM-T88III

CONFIDENTIAL
Paper roll Character commands ESC M
Ver. 10.01 p. 124
ESC M
SETTING COMMAND
[Name] Select character font
[Format] ASCII ESC M n
Hex 1B 4D n
Decimal 27 77 n
[Range] TM-U220, TM-T88III: n = 0, 1, 48, 49
TM-J2000/J2100, TM-T90, TM-L90:
n = 0, 1, 48, 49 (Other than Japanese model)
0 ≤ n ≤ 2, 48 ≤ n ≤ 50 (Japanese model)
TM-P60: 0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Default] TM-T88III, TM-J2000/J2100, TM-T90, TM-L90: n = 0
TM-P60, TM-U220: n = 1
[Printers not featuring this command] TM-L60II, TM-U230, TM-U210, TM-U300A/B
[Description] Selects a character font, using n as follows:
[Notes]
■ The character font set by this command is effective for alphanumeric, Kana, Thai, and user-defined
characters.
■ Configurations of Font A and Font B depend on the printer model.
■ The settings of this command are effective until ESC ! is executed, ESC @ is executed, the printer is reset,
or the power is turned off.
n Font
0, 48 Font A
1, 49 Font B
2,50 Font C
Character commands