CONFIDENTIAL
Paper roll Character commands ESC %
Ver. 10.01 p. 112
ESC %
SETTING COMMAND
[Name] Select/cancel user-defined character set
[Format] ASCII ESC %
n
Hex 1B 25
n
Decimal 27 37
n
[Range] 0 ≤
n
≤ 255
[Default]
n
= 0
[Printers not featuring this command] TM-P60
[Description] Selects or cancels the user-defined character set.
• When the LSB of
n
is 0, the user-defined character set is canceled.
• When the LSB of
n
is 1, the user-defined character set is selected.
[Notes]
■ When the user-defined character set is canceled, the resident character set is automatically selected.
■ Settings of this command are effective until ESC @ is executed, the printer is reset, or the power is turned
off.
[Model-dependent variations] TM-U210
See program example and print sample for ESC %, ESC &, and ESC ?.
TM-U210
This command is effective only when the receive buffer capacity is 40 bytes (when DIP switch 1-2
is ON).
Character commands
To Next Page
Loading...
