CONFIDENTIAL
Paper roll Miscellaneous commands DLE ENQ
Ver. 10.01 p. 379
DLE ENQ
EXECUTING COMMAND
[Name] Send real-time request to printer
[Format] ASCII DLE ENQ
n
Hex 10 05
n
Decimal 16 5
n
[Range] TM-J2000/J2100, TM-T90, TM-L90:0
≤
n
≤ 2
TM-T88III:
n
= 1, 2
TM-U220, TM-P60:
n
= 2
TM-U230, TM-U210:
n
= 0, 2
[Default] None
[Printers not featuring this command] TM-L60II, TM-U300A/B
[Description] Responds to a request in real time from the host computer, using
n
as follows:
[Notes]
■ This is a real-time command that the printer executes upon receiving it. Note the following when using
this command.
• If this command is embedded within the code string of another command, it is processed as a
parameter of the other command, and the print result is not correct.
• If another command (such as graphics data or defined data) has a code string in a parameter that is the
same as this command, the printer starts processing this command.
■ The request of
n
= 0 can be used in the following online recovery waiting status.
• The roll paper is installed in TM-U230 or TM-U210.
n
Request
0 Recovers to online status when following online recovery waiting status.
GS ^, GS FF status waiting for the button to be pressed.
GS z 0 online recovery waiting status.
1 Recovers from a recoverable error and restarts printing from the line where the error occurred.
2 Recovers from a recoverable error after clearing the receive and print buffers.
Miscellaneous commands
To Next Page
Loading...
Need help?
General