CONFIDENTIAL
Paper roll Miscellaneous commands DLE DC4 (fn = 8)
Ver. 10.01 p. 397
TM-L90
The BUSY condition is selected by memory switch 1-3.
When using the following commands, be sure there is no sequence that corresponds to the
sequence of this command in the data line.
Graphics: GS ( L
Bit image: ESC *, FS q, GS *, GS v 0
Character pattern: ESC &, FS 2
TM-P60
When using the graphic command GS(L, be sure there is no sequence that corresponds to the
sequence of this command in the data line.
TM-T88III
The BUSY condition is selected by memory switch 1-3.
When using the following commands, be sure there is no sequence that corresponds to the
sequence of this command in the data line.
Bit image: ESC *, FS q, GS *, GS v 0
Character pattern: ESC &, FS 2
To Next Page
Loading...
Need help?
General