Epson TM-T88III Programming Guide

CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.01 p. 617
• Sets the layout in the vertical direction by ( sb ) to ( sf ). (BM = black mark).
• The print starting position set by sd is top of the print area.
• The setting unit is 0.1 mm. The relationship between each setting value of the layout of the vertical
direction and paper layout is as follows.
• Sets the layout in the horizontal direction by sg to sh.
( sa = 49)( sa = 64)
sb Top of a BM ~ top of next BM. Bottom of a label ~ bottom of the next label.
sc Top of a BM ~ bottom of BM. Bottom of a label ~ top of the next label.
sd Top of a BM ~ print starting position. Bottom of a label ~ the print starting position.
se Top of a BM ~ cutting position. Bottom of a label ~ cutting position.
sf Print starting position ~ bottom of the print area. Print starting position ~ bottom of the print area.
(s a = 49)(s a = 64)
sg Left of the paper ~ left of print area. Left of the paper ~ left of print area.
sh Left of the print area ~ right of print area. Left of the print area ~ right of print area.

Epson TM-T88III Specifications

General

Brand	Epson
Model	TM-T88III
Category	Printer
Language	English