CONFIDENTIAL
Paper roll Character commands GS ( N
Ver. 10.01 p. 144
GS ( N p
L
p
H
fn m <Function 48>
[Name] Select character color
[Format] ASCII GS ( N
pL pH fn m
Hex 1D 28 4E 02 00 30
m
Decimal 2940782048
m
[Range] (
pL
+
pH
× 256) = 2 (
pL
=2,
pH
=0)
TM-J2000 (single-color printing model):
m
= 48, 49
TM-J2100 (two-color printing model): 48 ≤
m
≤ 51
TM-T90, TM-L90:
m
= 49 (selects black and white thermal paper)
m
= 49, 50 (selects two-color thermal paper)
[Default]
m
= 49
[Description] Selects character color specified by
m
as follows:
[Notes]
■ When None (
m
= 48) is selected, the printer treats the character as nonprinting dots. When using this
parameter combined with Function 50, characters can be printed in white with shadow on a black
background.
■ When underline mode is turned on, the underline will be printed in the color specified by this function.
■ In white/black reverse print mode, the printer treats the character as nonprinting dots and prints the
background in the color specified by this function.
■ When character with shadow is selected by Function 50, dots, except for the background and shadow
parts, are printed in the color specified by this function.
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-L90
m
Character color
48 None (not print)
49 Color 1
50 Color 2
51 Color 3
To Next Page
Loading...
Need help?
General