CONFIDENTIAL
Paper roll Panel button command ESC c 5
Ver. 10.01 p. 159
TM-U220
The panel button is FEED.
When the roll paper end sensor detects a paper end, the FEED button is enabled regardless of the
setting of this command.
When the cover is open, the FEED button is disabled regardless of the settings of this command.
TM-U210
The panel button is PAPER FEED.
When you change the roll paper after the printer stop printing because of roll paper end, the
following processing is done regardless of the settings of this command.
• When the printer is waiting for the roll paper to be set (the LED is off), the PAPER FEED is enabled, and
paper can be fed.
• When the LED blinks to indicate that the printer is confirming the status, the PAPER FEED is enabled. Even
if the switch is pressed, paper cannot be fed.
TM-U300A/B
The panel button is FEED.
When the cover is open, this button is enabled regardless of the settings of this command.
To Next Page
Loading...
Need help?
General