Epson TM-T88III

CONFIDENTIAL
Paper roll Paper sensor commands ESC c 4
Ver. 10.01 p. 165
TM-T88III
Bits 2 and 3 are undefined.
The roll paper end sensor is always enabled, and when it detects a paper-end, the printer stops
printing.
When a roll paper near-end or a roll paper end are detected, the PAPER OUT LED comes on.
TM-L90
Bits 2 and 3 are undefined.
The roll paper end sensor is always enabled, and when it detects a paper-end, the printer stops
printing.
When a roll paper near-end or a roll paper end are detected, the PAPER OUT LED comes on.
TM-L60II
Bits 2 and 3 are undefined.
The roll paper end sensor is always enabled, and when it detects a paper-end, the printer stops
printing.
When a roll paper near-end or a roll paper end are detected, the PAPER LED comes on.
TM-U230
Bits 2 and 3 are undefined.
The roll paper end sensor is always enabled, and when it detects a paper-end, the printer stops
printing.
When a roll paper near-end or a roll paper end is detected, the PAPER OUT LED comes on.
When the built-in buzzer is enabled (DIP switch 2-8 is ON), the buzzer rings when the PAPER OUT
LED comes on.