CONFIDENTIAL
Paper roll TM-T90 supported commands
Ver. 10.01 p. 23
GS ( M
EXECUTING + SETTING
Customize printer control value(s)
CUSTOMIZE COMMANDS
GS ( N
SETTING COMMAND
Select character effects
CHARACTER COMMANDS
GS ( k
EXECUTING + SETTING
Specify and print the symbol
TWO DIMENSION CODE COMMANDS
GS :
EXECUTING + SETTING
Start/end macro definition
MACRO FUNCTION COMMANDS
GS B
SETTING COMMAND
Turn white/black reverse printing mode on/off
CHARACTER COMMANDS
GS H
SETTING COMMAND
Select printing position of HRI characters
BAR CODE COMMANDS
GS I
EXECUTING COMMAND
Transmit printer ID
MISCELLANEOUS COMMANDS
GS L
SETTING COMMAND
Set left margin
PRINT POSITION COMMANDS
GS P
SETTING COMMAND
Set horizontal and vertical motion units
MISCELLANEOUS COMMANDS
GS T
EXECUTING COMMAND
Set print position to the beginning of print line
PRINT POSITION COMMANDS
GS V
EXECUTING COMMAND
Select cut mode and cut paper
MECHANISM CONTROL COMMANDS
GS W
SETTING COMMAND
Set printing area width
PRINT POSITION COMMANDS
GS \
EXECUTING COMMAND
Set relative vertical print position in page mode
PRINT POSITION COMMANDS
GS ^
EXECUTING COMMAND
Execute macro
MACRO FUNCTION COMMANDS
GS a
EXECUTING + SETTING
Enable/disable Automatic Status Back (ASB)
STATUS COMMANDS
GS b
SETTING COMMAND
Turn smoothing mode on/off
CHARACTER COMMANDS
GS f
SETTING COMMAND
Select font for HRI characters
BAR CODE COMMANDS
GS g 0
SETTING COMMAND
Initialize maintenance counter
MISCELLANEOUS COMMANDS
Command Classification Name Function type
To Next Page
Loading...
Need help?
General