Epson TM-T88III

CONFIDENTIAL
Paper roll Bit-image commands GS ( L GS 8 L
Ver. 10.01 p. 240
■ The relationship between NV graphics data (raster format) and print results is shown in the table below.
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-L90, TM-P60
TM-J2000/J2100
This printer is equipped with a print head configured in column format, which makes it faster to
define data using Function 68 (column format) than with this function.
The [data value ( k ) + control information data value (32 bytes)] area of the NV graphics data
domain is used when this function is executed.
TM-T90
For specifying paper (2-color/single-color), see Function 5 of GS ( E.
The [data value ( k ) + control information data value (24 bytes)] area of the NV graphics data
domain is used when this function is executed.
TM-L90
For specifying paper (2-color/single-color), see Functions5 of GS ( E.
The [data value ( k ) + control information data value (24 bytes)] area of the NV graphics data
domain is used when this function is executed.
TM-P60
The [data value (
k ) + control information data value (see the table below)] area of the NV graphics
data domain is used when this function is executed.
d1 d2 ... dX
dX +1 dX +2 ... dX x2
::...:
... dk -2 dk -1 dk X = ( xL + xH ✕ 256)
MSB LSB MSB LSB MSB LSBMSB LSB