CONFIDENTIAL
Paper roll Status commands DLE EOT
Ver. 10.01 p. 304
• Roll paper sensor status (
n
= 4) is as follows:
• Some paper sensors are not present, depending on the printer model. The names of some paper sensors
are different, depending on the printer model.
Bit Off/On Hex Decimal Status
0 0 00 0 Not used. Fixed to Off.
... how to use
this table
1 1 02 2 Not used. Fixed to On.
2, 3 00 00 0 Roll paper near-end sensor: paper adequate.
11 0C 12 Roll paper near-end sensor: paper near end.
4 1 10 16 Not used. Fixed to On.
5, 6 00 00 0 Roll paper end sensor: paper present.
11 60 96 Roll paper end sensor: paper not present.
7 0 00 0 Not used. Fixed to Off.
To Next Page
Loading...
Need help?
General