Epson TM-T88III

CONFIDENTIAL
Paper roll Bar code commands GS w
Ver. 10.01 p. 356
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-T88III, TM-L60II, TM-P60, TM-L90
TM-J2000/J2100
The module width differs, depending on the specification. (Unit: mm)
Program Example for all printers Print Sample
PRINT #1, CHR$(&H1D);"h";CHR$(80); ← Set height
PRINT #1, CHR$(&H1D);"w";CHR$(3); ← Set width size to 3
PRINT #1, CHR$(&H1D);"k";CHR$(2); ← Print bar code
PRINT #1, "496595707379";CHR$(0);
PRINT #1, CHR$(&HA);
PRINT #1, CHR$(&H1D);"w";CHR$(4); ← Set width size to 4
PRINT #1, CHR$(&H1D);"k";CHR$(2); ← Print bar code
PRINT #1, "496595707379";CHR$(0);
PRINT #1, CHR$(&HA);
PRINT #1, CHR$(&H1D);"w";CHR$(5); ← Set width size to 5
PRINT #1, CHR$(&H1D);"k";CHR$(2); ← Print bar code
PRINT #1, "496595707379";CHR$(0);
n Module width (mm) for multilevel bar code
Binary level bar code
Thin element width (mm) Thick element width (mm)
2, 68 0.282 {0.011 inch} 0.282 {0.011 inch} 0.706 {0.028 inch}
69 0.353 {0.014 inch} 0.353 {0.014 inch} 0.918 {0.036 inch}
3, 70 0.423 {0.017 inch} 0.423 {0.017 inch} 1.129 {0.044 inch}
71 0.494 {0.019 inch} 0.494 {0.019 inch} 1.271 {0.050 inch}
4, 72 0.564 {0.022 inch} 0.564 {0.022 inch} 1.411 {0.056 inch}
73 0.635 {0.025 inch} 0.635 {0.025 inch} 1.624 {0.064 inch}
5, 74 0.706 {0.028 inch} 0.706 {0.028 inch} 1.834 {0.072 inch}
75 0.776 {0.031 inch} 0.776 {0.031 inch} 2.047 {0.077 inch}
6, 76 0.847 {0.033 inch} 0.847 {0.033 inch} 2.258 {0.089 inch}
← Width size 3
← Width size 4
← Width size 5