CONFIDENTIAL
Paper roll Miscellaneous commands ESC ( A
Ver. 10.01 p. 401
■ If this command is newly processed during beeping of the buzzer, the current process for beeping the
buzzer is stopped and the new process for beeping the buzzer is started.
■ Integrated beeper beeping by this function stops due to any of the following factors.
• Finish specification of (
c
).
• The paramertor
n
specifies “doesn’t beep“ by this function.
• Printer processes DLE DC4 (fn = 2) command.
• Reset or power off.
[Model-dependent variations]TM-P60, TM-U230
TM-P60
The setting of Memory switches [Msw 8-2] ~ [Msw 8-5] doesn’t affect the performance of this
command.
The “doesn’t beep“ (
n
= 48) affects beeping caused by this function only. It doesn’t affect warning
beeping (Example: roll paper end, and during status sheet printing.)
The following beeping tones and timing can be specified by
n
.
n
Tone
48 doesn’t beep
49 1280Hz: 1000ms beeping
50 4100Hz: 1000ms beeping
51 1280Hz: 200ms beeping
52 4100Hz: 200ms beeping
53 1280Hz: 200ms beeping -> 200ms off -> 200ms beeping
54 4100Hz: 200ms beeping -> 200ms off -> 200ms beeping
55 1280Hz: 500ms beeping
To Next Page
Loading...
Need help?
General