CONFIDENTIAL
Paper roll Miscellaneous commands ESC ( A
Ver. 10.01 p. 403
ESC ( A pL pH fn
n c t1 t2 <Function 97 > (TM-U230)
[Name] Beep integrated beeper in TM-U230 models
[Format] ASCII ESC ( A
pL pH fn n c t1 t2
Hex 1B 28 41
05 00 61 n c t1 t2
Decimal 27 40 65
5 097n c t1t2
[Range] (
pL
+
pH
× 256) = 5 (
pL
= 5,
pH
= 0)
fn
= 97
n
= 100
0 ≤
c
≤ 63
0 ≤
t1
≤ 255
0 ≤
t2
≤ 255
[Description] Beeps the integrated beeper.
•
c
specifies times of beeping.
•
t1
specifies beeping time (
t1
× 100 ms).
•
t2
specifies time for stop beeping (
t2
× 100 ms).
[Notes]
■ This function repeats integrated beeper control of [(
t1
× 100 ms) beep/ (
t2
× 100 ms) stop]
c
times.
■ If this command is newly processed during beeping of the buzzer, the current process for beeping the
buzzer is stopped and the new process for beeping the buzzer is started.
■ Integrated beeper beeping by this function stops due to any of the following factors.
• Finish specification of (
c
).
• Offline factor specified by Function 98 has occurred.
• Factors specified by Function 99 have occurred.
• Reset or power off.
To Next Page
Loading...
Need help?
General