Epson TM-T88III

CONFIDENTIAL
Paper roll Miscellaneous commands GS ( H
Ver. 10.01 p. 438
.
When the error of bit 0 or bit 1 occurs, the error can be canceled by executing DLE ENQ after
clearing the error cause.
When the error of bit 2 occurs, the error can be canceled by either of the following. See the printer
information of function 3 of GS ( E for memory switches details.
When memory switch [Msw8-2] is OFF: execution of DLE ENQ or opening/closing the cover
When memory switch [Msw8-2] is ON: execution of DLE ENQ
<The fourth byte: information for recoverable error>
Bit Off/On Hex Decimal Information
0 Off 00 0 Autocutter error hasn’t occurred.
On 01 1 Autocutter error has occurred.
1 Off 00 0 Roll paper cover open error hasn’t occurred.
(When Msw [8-8] is ON)
On 02 2 Roll paper cover open error hasn’t occurred.
(When Msw [8-8] is ON)
2 Off 00 0 Roll paper layout error hasn’t occurred.
On 04 4 Roll paper layout error hasn’t occurred.
3 ~
5
- - - Reserved.
6 On 40 64 Fixed.
7 0 00 0 Fixed.