CONFIDENTIAL
Paper roll Miscellaneous commands GS E
Ver. 10.01 p. 455
[Notes]
■ When standard mode is selected, this command is enabled only when processed at the beginning of the
line.
■ In page mode, the setting for this command is effective for all data to be printed collectively by FF or
ESC FF.
■ The settings of this command are effective until ESC @ is executed, the printer is reset, or the power is
turned off.
■ In standard mode, all the data in a line is printed by the same head control method.
[Model-dependent variations] TM-U300C/D
TM-U300A/B
Bits 2 and 4 are undefined.
Program Example for all printers
PRINT #1,CHR$(&H1D);"E";CHR$(16); ← Select print speed to Low
To Next Page
Loading...
Need help?
General