CONFIDENTIAL
Paper roll Miscellaneous commands GS z 0
Ver. 10.01 p. 484
Printer status ➁:
Not printing because of a paper-end
When the sensor detects that a roll paper is inserted, the printer starts loading.
Printer status ➂:
Waiting for a roll paper to be inserted (waiting for online recovery)
The printer is in the paper wait status after loading and the paper out LED is off.
Printer status ➃:
Recovery confirmation status (online recovery wait status)
After waiting for a roll paper to be inserted, the paper out LED blinks, and the printer is in the recovery
confirmation status.
Printer status ➄:
Normal operation
When the online recovery wait time (the printer status ➂ + ➃) has elapsed, when the paper feed button is
pressed during the recovery confirmation time, or when DLE ENQ 0 is executed, the paper out LED is off,
the printer recovers online, and the printer executes normal processing.
During printer status ➂ and ➃, ASB status and DLE EOT are “online recovery wait status.”
User Operation
Operation ➀:
When the printer stops printing because of a paper-end, open the printer cover, remove the old roll paper,
and insert a new roll paper.
Operation ➁:
When paper position adjustment is needed, close the printer cover after the adjustment. If the paper out LED
is off, the paper can be fed by the paper feed button. After completing paper insertion, be sure to close the
printer cover.
Operation ➂:
Make sure that the paper out LED is blinking. If the paper out LED is off, wait until it blinks. After confirming
that the paper out LED is blinking, press the paper feed button.
To Next Page
Loading...
Need help?
General