CONFIDENTIAL
Paper roll Two-dimension code commands GS ( k
Ver. 10.01 p. 529
■ See previous [Notes for transmission process] for process sending data group.
[Model-dependent variations] TM-T90, TM-L90
TM-T90
When the vertical size exceeds 831 dots in standard mode, “other information” is “Printing is
impossible“(in decimal: 49).
TM-L90
When the vertical size exceeds 831 dots in standard mode, “other information” is “Printing is
impossible“(in decimal: 49).
(Number of columns × number of
rows) < number of codeword
Increase the number of columns by Function 065.
Increase the number of rows by Function 066.
Number of the codeword in the
data area is more than 928.
Reduce the data by Function 080.
Lower the error correction level by Function 069.
There is no data in the symbol
storage area.
Sends data to the symbol storage area by Function
080.
Cause Solution
To Next Page
Loading...
Need help?
General