CONFIDENTIAL
Paper roll Two-dimension code commands GS ( k
Ver. 10.01 p. 536
• Format Information
• Version Information
• Error Correction codewords (employs the Reed-Solomon Error Detection and Correction algorithm)
• Pad codeword
• Number of bits in Character Count Indicator
• Mode Indicator
• Terminator
• Alignment Patterns (when model 2 is selected)
• Extension Patterns (when model 1 is selected)
■ Printing of symbol is not affected by print mode (emphasized, double-strike, underline, white/ black
reverse printing, or 90° clockwise-rotated), except for character size and upside-down print mode.
■ In standard mode, this command executes paper feeding for the amount needed for printing the symbol,
regardless of the paper feed amount set by the paper feed setting command. The print position returns to
the left side of the printable area after printing the symbol, and printer is in the status “beginning of the
line,” or “there is no data in the print buffer.”
■ In page mode, the printer stores the symbol data in the print buffer without executing actual printing. The
printer moves print position to the next dot of the last data of the symbol.
■ The quiet zone is not included in the printing data. Be sure to include the quiet zone when using this
function.
[Model-dependent variations] TM-T90, TM-L90
To Next Page
Loading...
Need help?
General