Epson TM-T88III

CONFIDENTIAL
Paper roll Two-dimension code commands GS ( k
Ver. 10.01 p. 538
GS ( k <Function 182>
[Name] QR Code: Transmit the size information of the symbol data in the symbol storage area
[Format] ASCII GS ( k pL pH cn fn m
Hex 1D 28 6B 03 00 31 52 m
Decimal 2940107 3 0 49 82 m
[Range] ( pL + pH × 256) = 3 ( pL = 3, pH = 0)
cn = 49
fn = 82
m = 48
[Description] Transmits the size information for the encoded QR Code symbol data in the symbol storage area using the
process of <Function 180>.
[Notes]
■ In standard mode, use this function when the printer is “at the beginning of a line,” or “there is no data in
the print buffer.”
■ The size information for each data is as follows;
(*1)”Horizontal size” and “vertical size” indicate the number of dots of the symbol.
Send data Hex Decimal Data
Header 37H 55 1 byte
Identifier 36H 54 1 byte
Horizontal size(*1) 30H − 39H 48 − 57 1 − 5 byte
Separator 1FH 31 1 byte
Vertical size(*1) 30H − 39H 48 − 57 1 − 5 byte
Separator 1FH 31 1 byte
Fixed value 31H 49 1 byte
Separator 1FH 31 1 byte
Other information(*2) 30H or 31H 48 or 49 1 byte
NUL 00H 0 1 byte