CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.01 p. 580
TM-T90
Receive buffer capacity [Msw 1-2]: Large (when
b
= 48) = 4 KB; small (when
b
= 49) = 45 bytes
This printer doesn’t support [Msw 1-6] (DM-D (Customer display) is connected or not)) and [Msw 2-3]
(Selecting character code system for the simplified Chinese model)
• When
a
= 8, memory switch 8 is set as follows:
<Other than Japanese model>
Setting of [Msw 8-3] is supported differently, depending on the firmware version.
Setting of [Msw 8-5] affects the performing of command GS k.
Settings of [Msw 8-7] affect the operation of ESC &, ESC c 3, GS *.
<Japanese model>
Msw Setting value (
b
) Function
8-1, 8-2 50 Reserved
8-3 48 PAPER LED is on when a paper near end is detected
49 PAPER LED is off when a paper near end is detected
8-4 50 Reserved
8-5 48 Spacing of both sides for bar code: not inserted
49 Spacing of both sides for bar code: inserts a space
8-6 50 Reserved
8-7 48 Compatibility with TM-T88II: not compatible
49 Compatibility with TM-T88II: compatible
8-8 48 Roll paper cover open during printing: automatic recoverable error
49 Roll paper cover open during printing: recoverable error
Msw Setting value (
b
) Function
8-1, 8-2 50 Reserved
8-3 48 PAPER LED is on when a paper near end is detected
49 PAPER LED is off when a paper near end is detected
8-4 50 Reserved
To Next Page
Loading...
