Epson TM-T88III Programming Guide

CONFIDENTIAL
Paper roll Print commands ESC J
Ver. 10.01 p. 85
TM-P60
The vertical or horizontal motion unit is approximately 0.125 mm {1/203 inches}. This value equals
one dot pitch.
In standard mode, if the character height is greater than the specified paper feed amount, the
paper is fed the amount of the character height. For example, if a paper feed of 30 dots is
specified with ESC J, but the character height is 48 dots, the paper is fed 48 dots.
TM-U230
The vertical motion unit is 0.176 mm {1/144 inch}. This value equals a half dot pitch. This command
does not use the horizontal motion unit because the printer does not support page mode.
TM-U220, TM-U210
The vertical motion unit is 0.176 mm {1/144 inch}. This value equals a half dot pitch. This command
does not use the horizontal motion unit because the printer does not support page mode.
TM-U300A/B
The vertical motion unit is 0.176 mm {1/144 inch}. This value equals a half dot pitch. This command
does not use the horizontal motion unit because the printer does not support page mode.

Epson TM-T88III Specifications

General

Brand	Epson
Model	TM-T88III
Category	Printer
Language	English