Epson TM-T88III Programming Guide

CONFIDENTIAL
Paper roll Print commands GS FF
Ver. 10.01 p. 93
• When the paper feed button is pressed, the next label is fed in reverse direction to the print starting
position. When a left margin is set, the print position is set to the left margin.
■ When panel buttons are disabled by ESC c 5, the paper feed button is enabled temporarily when the
paper LED blinks to indicate that the printer is waiting for the paper feed button to be pressed (but a label
cannot be fed).
■ Methods of specifying label paper differ, depending on the printer models.
[Model-dependent variations] TM-L60II
TM-L60II
The paper LED blinks while the printer is waiting for a label to be peeled off. The paper feed
button is used for feeding a label.
A thermal label is selected when DIP switch 2-6 is ON with a serial interface.
A thermal label is selected when DIP switch 1-7 is ON with a parallel interface.
Program Example for all printers Print Sample
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&H1D);CHR$(&HC);
PRINT #1, "CCCCC"; CHR$(&HA);
AAAAA
BBBBB
CCCCC

Epson TM-T88III Specifications

General

Brand	Epson
Model	TM-T88III
Category	Printer
Language	English