evertz 3025EMC - Page 192

3025EMC Master Control Switching & Channel Branding
Page 178 Revision 3.0.3
Upstream Dest Key
Input
Displays the current
source that is routed to
the corresponding EMC
input.
N/A
I/P using Source
Preset
Route the
corresponding
destination that feeds
the specified input to
the EMC.
Release Key
Not Supported
Save
N/A
Used with Market and
DVE Move Selection
keys to save changes
to Markets and DVE
moves.
N/A
Tally Key
N/A
Used to change the
tally channel within a
market. Used with
Channel key type.
N/A
Colour
Adjustment Hue
Keyers
Not Currently
Supported
N/A
DVE
Not Currently
Supported
Wipe
Not Currently
Supported
Colour
Adjustment
Luminance
Keyers
Not Currently
Supported
N/A
DVE
Not Currently
Supported
Wipe
Not Currently
Supported
Colour
Adjustment
Saturation
Keyers
Not Currently
Supported
N/A
DVE
Not Currently
Supported
Wipe
Not Currently
Supported
Buddy Panel Menu
Update
N/A
Change the Menu on
the buddy panel
associated to this
panel.
N/A
Buddy Panel Menu
Follow
N/A
Change the Menu on
the buddy panel
associated to this panel
and the local panel.
N/A
T –Bar Action
N/A
Toggle the T-Bar (if
fitted) on/off.
N/A
Side Car Layout
Layout # (1-4)
Change the layout of
the side car (if fitted).
N/A