evertz 7700 - Selecting the Source Media; Selecting the Media File Name; Selecting the Destination Media; Deleting a File

7700 Multiframe Manual
7725DSK-LG / 7725DSK-LG-HD HD/SD Logo Inserter & Media Keyer
Page 4-20 Revision 1.4 RCP OPERATION
4.7.1. Selecting the Source Media
MANAGE FILES
Media
[serial number]
This menu item is used to select the source media drive that you are
working with. Each media drive is identified by the serial number of the
compact flash media that is currently in the drive. Units that are not fitted
with one of the compact flash expansion drives will only have 1 item in this
list.
Use the Ï or Ð buttons to display the serial number of the media that will
be the source for the file operation and press the SELECT button.
4.7.2. Selecting the Media File Name
MANAGE FILES
File: boot
[file name]
This menu item is used to select the file name of the logo or other media file
that you want to perform the file operation on.
Use the Ï or Ð buttons to display a list of all the media files on the drive
selected with the Media menu item. When you have selected the desired
media file press the SELECT button.
4.7.3. Selecting the Destination Media
MANAGE FILES
To
[serial number]
This menu item is used to select the destination media drive that you are
working with. Each media drive is identified by the serial number of the
compact flash media that is currently in the drive. Units that are not fitted
with one of the compact flash expansion drives will only have 1 item in this
list.
Use the Ï or Ð buttons to display the serial number of the media that will
be the source for the file operation and press the SELECT button to choose
the displayed item.
4.7.4. Deleting a File
MANAGE FILES
Delete
This menu item is used to delete the file specified by the File menu item
from the source media (chosen by the Media menu item).
Press the SELECT button to initiate the delete function. If the file is active
(i.e. the logo is being keyed), the delete function will fail.
4.7.5. Erasing all the Files from a Media Disk
MANAGE FILES
Format
This menu item is used to delete all the files from the source media (chosen
by the Media menu item).
Press the SELECT button to initiate the format function. If there are active
files on the media (e.g. one or more of the logo files are being keyed), the
format function will fail.