evertz 7700 - Setting a User Defined Matte Aspect Ratio; Setting the Matte Top; Setting the Matte Bottom; Setting the Matte Aspect Ratio

7700 Multiframe Manual
7725DSK-LG / 7725DSK-LG-HD HD/SD Logo Inserter & Media Keyer
VLPRO OPERATION Revision 1.4 Page 3-15
3.7.2. Setting a User Defined Matte Aspect Ratio
There are two options that allow the user to define custom aspect ratios for the matte. Selecting a pre-
defined aspect ratios will lose any changes you have made to the Matte Top and Matte Bottom options
unless they are stored using the user presets (see section 3.12). When you manually change the
Matte Top and Matte Bottom settings the Matte Aspect will show the aspect ratio as (user).
3.7.2.1. Setting the Matte Top
The Matte Top parameter is used to set the bottom line of the Top matte.
3.7.2.2. Setting the Matte Bottom
The Matte Top parameter is used to set the top line of the Bottom matte.
3.7.3. Setting the Matte Aspect Ratio
This option is used to set the aspect ratio of the matte.
There are three pre-defined aspect ratios available. When you select one of these aspect ratios the
7825DSK2-LG-HD will automatically set the Matte Top and Matte Bottom menu items.
In addition you can set a user defined aspect ratio by manually changing the Matte Top and Matte
Bottom menu items. (See section 3.7.2)
"
Please note that aspect 1.33 is only available on SD Units.