7700 Multiframe Manual
7725DSK-LG / 7725DSK-LG-HD HD/SD Logo Inserter & Media Keyer
Page 4-6 Revision 1.4 RCP OPERATION
4.4. NAVIGATING THE SETUP MENU
To enter the Setup menu, press the SETUP button. This will bring you to the main Setup menu where
you can use the Ï & Ð buttons to move up and down the list of available sub-menus. Once you have
chosen the desired sub-menu, press the SELECT button to select the next menu level.
Once in a sub-menu, there may be another menu layer, or there may be a list of parameters to adjust.
If there is another set of menu options, use the Ï & Ð buttons to select the desired menu item and
press the SELECT button. Continue this process until you get to the bottom of the menu tree where
the list of parameters to be adjusted is shown.
To adjust any parameter, use the Ï & Ð buttons to move up or down the parameter list to the desired
parameter. To view the possible values for that item, press the SELECT button. The current value for
that parameter will be shown with an asterisk (*). Pressing the Ï & Ð buttons allows you to show the
possible values for the selected parameter. The various parameter values that are not currently
selected will NOT have an asterisk (*). When you have stopped at the desired value, press the
SELECT button to save your selection. The value will be shown with an asterisk (*), indicating that it is
now the current value. To move up one level in the menu press the SETUP button.
You can select other parameters from that sub-menu by using the Ï & Ð buttons, followed by the
SELECT button. Alternately you can move up one menu item by pressing the SETUP button.
When you have made all the desired changes, press the SETUP button one or more times until you
return to the top of the Menu tree and exit the Setup menu.
Each of the menu items, with function explanations, is described in the following sections.
To Next Page
Loading...
