7700 Multiframe Manual
7725DSK-LG / 7725DSK-LG-HD HD/SD Logo Inserter & Media Keyer
RCP OPERATION Revision 1.4 Page 4-9
4.6. GENERAL CONFIGURATION ITEMS
The GENERAL Setup menu is used to set up various items related to the overall operation of the
7725DSK-LG such as Video Standard, Time settings, Network info, COM port settings and firmware
versions. Table 4-1 shows the items available in the GENERAL Setup menu. Sections 4.6.1 to 4.6.13
provide detailed information about each of the sub-menus.
Select Standard Sets the video standard
Reference Timing Configures the reference timing of the device
Update Code Displays product name, firmware version, and option to upgrade unit
Time Setup Configures the real time clock and LTC timecode input
Network Info Configures the Ethernet Network Address for FTP uploads
SNMP Trap Dest Configures the IP address for SNMP Traps
AFD Trigger Configures the handling of AFD triggers. Available on HD Units only.
Serial Control Configures the function of the SERIAL CONTROL (COM C) Port
COM D Configures the function of the COM D serial port
COM E (net) Configures the function of the virtual serial port (COM E)
Genlock Status Displays genlock status.
Line 21 Protect Controls whether logos can be placed on Line 21 (SD Units Only)
Unit Name Sets the unit name when used with a M2100 control panel
Up Down Timer Configures the two up/down timers for time logos
Automation Debug Debugging tool for the Evertz automation protocol
M2100 Auto Debug Debugging tool for the M2100 automation protocol
Table 4-1: Top Level of the General Setup Menu
To Next Page
Loading...
