evertz 7700 - How to Incorporate a Router; Using a Xenon Router; Using a X1200 Series Router

7700 Multiframe Manual
7725DSK-LG / 7725DSK-LG-HD HD/SD Logo Inserter & Media Keyer
INSTALLATION Revision 1.4 Page 2-15
5) In the Network Configuration menu item, type the corresponding number from the list, and then
press <ENTER>. Remember to SAVE (S or 6) when a change has been made before
exiting the menu. In the above menu (Figure 2-8), selecting options (1) through (4) allows the
user to set the networking parameters of the 7725DSK-LG.
6) Once changes are completed and saved, the 7725DSK-LG module should be power-cycled for
the changes to take effect.
2.12. HOW TO INCORPORATE A ROUTER
The 7725DSK-LG has the ability to control an upstream router. This control is done serially using
either GVG Ten XL or Quartz Router control protocols. Details on the specific routers can be found in
their individual manuals.
2.12.1. Using a Xenon Router
The 7725DSK-LG can control a Xenon router (or other Quartz router) using the Quartz Router control
protocol. In conjunction with a QMC-DCP, users can router ANY input source to the PGM IN A, PGM
IN B, FILL IN, and KEY IN. The communication between the Xenon and 7725DSK-LG is done over a
serial cable.
If multiple 7725DSK-LGs are to be connected to a single Xenon router, then a 7700R-SC will be
required to bridge the serial connections to the single router. Please call factory for more information
on this configuration.
2.12.2. Using a X1200 Series Router
The 7725DSK-LG can control X1200 series router using the GVG Ten XL protocol. In conjunction with
a QMC-DCP, users can router ANY input source to the PGM IN A, PGM IN B, FILL IN, and KEY IN.
The communication between the X1200 series router and 7725DSK-LG is done over a serial cable.