7700 Multiframe Manual
7725DSK-LG / 7725DSK-LG-HD HD/SD Logo Inserter & Media Keyer
VLPRO OPERATION Revision 1.4 Page 3-11
3.5.3. Firmware Version
This parameter informs the user of the build number.
Reboot: This option allows the user to reboot the unit. Once selected, a message will appear in
order to confirm whether the user would like to proceed with the reboot.
"
Note: Firmware upgrades can be performed most easily through Overture Media
Manager software provided in the Keyer Tool Kit CD.
3.5.4. AFD
AFD (Active Format Description) is intended to guide video equipment regarding the display of aspect
ratio. A logo can be used to mask out areas that are not relevant to a particular aspect ratio of a
program shown within an HD format. The AFD feature is VANC based, and therefore, only available
when running HD video standard.
AFD CODE: This parameter allows the user to detect a particular AFD code in the HD VANC. The
codes are based on SMTPE 2016. Please note that the codes are represented in
binary.
"
Note: The slider is available for selecting H and V Offsets for Timing Under Video,
selecting the AFD Code, etc. To increment by one, click right of the slider and to
decrement, click left of slider. The slider can be selected and dragged across if
gross movement is desired.
AFD LOGO: Select the drop down menu to choose the desired logo, under AFD Logo tab.
AFD MODE: This parameter allows the user to select what action will be taken when a trigger is
received.
When set to DSK mode the downstream keyer will be turned on.
When set to Logo mode the logo that is specified will be turned on when a trigger is
received.
3.5.5. Controls
GENLOCK STATUS: This option displays the status of the keyer in regards to genlock. The status
will indicate whether the keyer is locked to reference or not.
ROUTER ENABLE: This option allows the user to enable or disable the router controls.
ROUTER SELECT: This option allows the user to select the desired router type.
To Next Page
Loading...
