evertz 7700 - Setting the Temperature Source; Setting the Static Temperature; Temperature Read Loss

7700 Multiframe Manual
7725DSK-LG / 7725DSK-LG-HD HD/SD Logo Inserter & Media Keyer
VLPRO OPERATION Revision 1.4 Page 3-21
3.9.2. Setting the Temperature Source
This option is used to select the source of the temperature that will be displayed in temperature type
logos.
Probe: Select Probe to take the temperature from the optional temperature probe.
See section 2.9 for more information on using the temperature probe.
Manual: Select Manual to manually set the temperature via the Set Temperature menu
item.
METAR: Select METAR to take the temperature from METAR data acquired via the
Internet.
3.9.3. Setting the Static Temperature
This option is used to set the temperature to be displayed in temperature type logos when the
“Temperature Source” is set to Manual.
3.9.4. Temperature Read Loss
This option is used to set the behaviour when the temperature source is lost.
Show Blank: Selecting Show Blank will display nothing.
Last Valid: Selecting Last Valid will display the last valid temperature.