7700 Multiframe Manual
7725DSK-LG / 7725DSK-LG-HD HD/SD Logo Inserter & Media Keyer
VLPRO OPERATION Revision 1.4 Page 3-29
On: Selecting the On tab (on the Preview or Program bus) will enable the Voice Over control in
preview and program outputs.
Off: Selecting the Off tab will disable the Voice Over control.
Toggle: Selecting the Toggle tab will enable the user to toggle between Voice Over controls.
Voice Over In Rate: The rate at which Voice Over fades in with program audio and is
measured in fields.
Voice Over Out Rate: The rate at which Voice Over fades out with program audio and is
measured in fields.
3.13.5. Transition Control
The DO TRANSITION button starts a transition of what is displayed on the Preview Bus to the Program
Bus. The transition “Type,” “Rate” and “Swap Mode” are set using the options in the Transition window
(see section 3.10). Transitions can also be triggered using GPI, or automation control.
Within the “Transition” window, when the “Transition Swap Mode” is set to Swap the input video and
audio of the Preview Bus and the Program Bus will be swapped at the end of the transition. Logos and
other media being keyed on the respective buses will also be swapped with the inputs.
When the “Transition Swap Mode” is set to No Swap the input video and audio of the Preview Bus will
be transferred to the Program Bus. Logos and other media being keyed on the Preview Bus will also
be transferred to the Program Bus. The Preview Bus will remain unchanged.
If the Enable Dynamic Apply icon is selected, all changes will apply automatically.
To Next Page
Loading...
