7700 Multiframe Manual
7725DSK-LG / 7725DSK-LG-HD HD/SD Logo Inserter & Media Keyer
DESKTOP CONTROL PANEL Revision 1.4 Page 6-7
Once in a sub-menu, there may be another menu layer (shown in Title Case), or there may be a list of
parameters to adjust (shown in lower case). If there is another set of menu choices, use SHAFT
ENCODERS to select the desired menu item and press the SELECT button. Continue this process
until you get to the bottom of the menu tree where the list of parameters to be adjusted is shown.
To adjust any parameter, use the SHAFT ENCODERS to move up or down the parameter list to the
desired parameter. To view the possible values for that item, press the SELECT button. The current
value for that parameter will be shown with an asterisk (*). Turning one of the SHAFT ENCODERS
allows you to show the possible values for the selected parameter. The various parameter values that
are not currently selected will NOT have an asterisk (*). When you have stopped at the desired value,
press the SELECT button to save your selection. The value will be shown with an asterisk (*)
indicating that it is now the current value. To move up one level in the menu press the SETUP button.
You can select other parameters from that sub-menu by using the SHAFT ENCODERS, followed by
the SELECT button. Alternately you can move up one menu item by pressing the SETUP button.
When you have made all the desired changes, press the SETUP button one or more times until you
return to the top of the Menu tree and exit the Setup menu.
Each of the menu items, with a function explanation, is described in sections 4.5 to 4.14.
To Next Page
Loading...
