Falcon M-Class | User Guide
84
Indicates the Voice VLAN port discovery protocol.
It will only work when auto detect mode is enabled.
We should enable LLDP feature before configuring discovery
protocol to "LLDP" or "Both".
Changing the discovery protocol to "OUI" or "LLDP" will restart auto
detect process. Possible discovery protocols are:
OUI: Detect telephony device by OUI address.
LLDP: Detect telephony device by LLDP
Both: Both OUI and LLDP
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to
previously saved values.
4.7.6.3 Voice VLAN OUI Table
Configure VOICE VLAN OUI table on this page. The maximum number of entries is 16.
Modifying the OUI table will restart auto detection of OUI process
OUI is the organizationally unique identifier. An OUI address is a globally unique identifier assigned
to a vendor by IEEE. You can determine which vendor a device belongs to according to the OUI
address which forms the first 24 bits of a MAC address.
Figure 4-40: Voice VLAN OUI Table display
To Next Page
