Fluke 54200 - Page 217

Remote Control
RS-232 Interface
6
6-9
•
The screen shows the current interface configuration:
Figure 6-9. RS-232 Configuration
•
Press the
ê
softkey (F2) to select the parameter for the baud rate.
•
Press the
edit
softkey (F3).
•
A popup menu appears:
Figure 6-10. Baud Rate
•
Press the
é
or
ê
softkey (F1 or F2) to select the appropriate baud rate.
•
Press the
enter
softkey (F5) to confirm your selection.