Fluke 990DSL - Page 137

POTS Testing and Fault Location
Terminated VF Tests
4
4-73
Table 4-20. Manual Terminator Commands (continued)
To apply this termination: Select this function:
Voiceband Tone VF Single Tone
• Frequency (24 Hz to 20 kHz)
• Impedance (600Ω or 900Ω)
Wideband Tone WB Single Tone
• Frequency (10 to 1200 kHz)
• Impedance (100Ω or 135Ω)
Broadband Tone* BB Single Tone
• Frequency (128 kHz to 18 MHz)
• Impedance (100• or 135•)
SmartTone (100-Tone sig.) SmartTone
* Requires TN2200 Terminator II or CopperPro Series II Tester in T.E. mode