990DSL
Users Manual
7-8
2. Use these softkeys to navigate through the list:
• Press A(
More) then press F to page forward or H to page
backward.
• Press B(
Start) to display the first screen. The oldest results are on
listed this screen.
• Press C(
End) to display the last screen. The most recent results are
listed on this screen.
Viewing Results for a Particular Wire Center
The CopperPro groups test results under Wire Center names. If you want to
view test results for a particular Wire Center, do the following:
1. On the
Saved Results screen (Figure 7-2), press B(View by Filename).
A list of Wire Center names with associated results is displayed.
2. Press A(
More) until you display the screen containing the desired Wire
Center name.
3. Press F or H to move the cursor to the Wire Center name. Then, press
B(
View).
The results saved under the Wire Center name you selected are displayed.
Viewing Results for a Particular Period of Time
You can view results of tests conducted during a particular time period. To do
this, complete the following:
1. On the
Saved Results screen (Figure 7-2), press C(View by Time
Stamp
).
2. When prompted, type both a starting date and time and ending date and
time in the space provided.
To Next Page
Loading...
