8-1
Chapter 8
Updating the CopperPro
with New Software
Introduction
Periodically, Fluke Networks releases software updates for your 990DSL
CopperPro Loop Tester. When an update is available, you can download it
from the Fluke Networks website at http://www.flukenetworks.com
.
The process of updating the CopperPro with new operating software
consists of three basic steps:
1. Connect the CopperPro to a personal computer (PC).
2. Put the CopperPro in download mode.
3. Install the software update program on the PC and download the files
to the CopperPro.
This chapter provides instructions for each step in this process.
To Next Page
Loading...
