Fluke 990DSL - Care and Maintenance; Service and Adjustment

990DSL
Users Guide
1-8
Care and Maintenance
The CopperPro is designed to be maintenance free. Treat it with care to ensure
the best performance. The suggestions below will help you to fulfill the
obligations of the warranty and enjoy the tester for many years.
• Avoid rough handling
Although the CopperPro is designed for use in the rugged OSP
environment and can absorb a generous amount of shock and vibration,
avoid dropping the tester. If you must ship the tester, use the original
packaging.
• Clean carefully
The plastic casing for your CopperPro has a finish that should retain its
durability for many years. To clean the tester, use a soft, slightly damp
cloth. To remove any stains, use a mild soap. Never use detergents,
solvents, or abrasive cleaners on the tester.
Service and Adjustment
Service and adjustment of the CopperPro should be performed by trained
Fluke Networks service personnel only.
If you experience a problem with the CopperPro, visit the Fluke Networks
Web site at www.flukenetworks.com
. Click Support to display the Support
Solutions
page. You can also send email to support@flukenetworks.com or
call one of the following numbers to report a problem:
• USA: 1-888-99-FLUKE (1-888-993-5853)
• Canada: 1-800-363-5853
• Europe: 00800 632 00 or +44 1923 281 300
• Beijing: 86 (10) 6512-3435
• Japan: +81-3-3434-0181
• Singapore: +65-6738-5655
• Anywhere in the world: +1-425-446-4519
Visit our website for the latest list of phone numbers.